Back to Back Issues Page |
New Video! How to use a laser level to set your grades January 11, 2019 |
How to use a laser level for setting your gradesIf you've never used a self-leveling rotary laser level to set grades, then you're going to want to watch this video! Using a laser level to check or level your sub-base is so much faster than older methods like using a transit or a pop-level. I use my laser level before every pour to set my grades for top of concrete floor, then during the concrete pour to help level the concrete and make sure I have a flat floor. I made a short video to show you how easy it is to use a laser level to check a sub-grade and how to set your grades for a finished floor.
How to use a laser level for beginners (Video)
I received some very good feedback about what kinds of things you want to learn about. For those of you who didn't get a chance to respond to the previous email survey, I'm including it again in this email. Please take a minute to respond below. Thank YOU I'm in the process of building some courses to teach you how to form, pour, and install concrete like the pros do. I would like to know what types of things you would like to learn about the most. I made a simple survey where you can check off some topics I have in mind and you can add one or more if there something that isn't listed. Please take a minute to help me better serve you in 2019 and click on the link to take you to the check list. Very much appreciated Mike Day
|
Back to Back Issues Page |