#Pouringconcrete #Beginners #Learn
Learn more about concrete: www.everything-about-concrete.com
If you're a beginner and want to learn how to pour concrete for a basement floor, this video will show you how to pour the concrete, how to screed the concrete, how to level the concrete, and how to bull float the concrete.
I use a laser level to set my finish floor grade four inches above the sub-grade. I mark the foundation wall with a pencil and the grade stick that has a receiver on it. The receiver reads the laser beam from the laser level and tells me when I'm at the right height. I mark the bottom of the grade stick and use these marks to snap a chalk line at the finished concrete floor height. I use the chalk line during the pour to mag float my wet pads around the perimeter of the basement floor.
I make a wet pad in the middle of the floor using the laser level and grade stick to use as my floor level while I screed. The wet pad in the middle is the same level as the outside perimeter. After screeding the floor, I bull float the concrete to smoothen the surface and prepare the concrete floor for the finishing process.
MY STAMPED CONCRETE COURSE:
https://mike-day.mykajabi.com/offers/3hhjPXHx
MY CONCRETE SLAB COURSE:
https://mike-day.mykajabi.com/pl/79570
CONCRETE HOPPER:
https://amzn.to/35iRZfh
12' CONCRETE CHUTE:
https://amzn.to/2QDW2O4
VISIT MY WEBSITE:
https://www.everything-about-concrete.com/
