Q. Sealed driveway and you can see stripes from the roller. How do you correct this?
A. If you used a solvent based sealer, you can spray on some xylene. This will soften the sealer and lay it down flat. If the stripes are thick, try back rolling them right after you spray with the xylene.
If you used a water based sealer you will have to strip the sealer with a chemical based stripper or a citrus based stripper and re-apply the sealer using a pump up sprayer.
Hi, I am Mike Day, owner of Day’s Concrete Floors, Inc. in Maine, where I've been working with concrete for 30 years now, and this website is where I can share with you all the knowledge and wisdom I've gained from installing all kinds of decorative concrete, concrete floors, concrete overlays, stained concrete and also fixing cracked or spalled concrete.
There’s a lot to cover, so if you have any questions, contact me!